Another alternative is to mount the rotor on standoffs,
oversize nuts can be used around the mounting bolts.
This allows the cable to come out under the rotor,
facilitating removal for service without having to first
remove the cable.
Tom N4KG
On Mon, 11 Mar 2002 "Eric Rosenberg" <wd3q@erols.com> writes:
>
> My new (to me) roof tower has a solid (i.e., no holes) mounting
> plate for a Yaesu rotator, which has its control cable coming
> out the side.
>
> I use a TR-44 rotator, so I need to (have a metal shop) cut a
> hole in the plate for the control cable to run through to the
> bottom of the rotator.
>
> Where can I find a template for the rotor?
>
> Thanks in advance,
>
> Eric W3DQ
> Washiongton, DC
>
>
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
|