How would a Wet/Dry shop vac work? I have seen those suck up a lot of
water. If possilbe blow it out.
Chris opr VE7HCB
At 05:31 PM 2002-05-28 -0500, Ford Peterson wrote:
>Lou AC0X wrote:
>
> > and how do I get the standing water out of a hole 5' deep with
> > such a small diameter?
> >
>
>I have a similar problem on a water line running to my barn before it
>freezes and ruins the line.
>
>Getting the water below the frost line is easy. Use a flexible plastic hose
>(a garden hose may work well). Stick the hose down the tube, plug the top
>end with your thumb, and pull out the hose. Each time the process is
>repeated, you get whatever the hose will hold out of the tube.
>
>This works well unless you need ALL the water out, in which case you will
>need a second small diameter hose to get the last little bit.
>
>Ford-N0FP
>ford@cmgate.com
>
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
|