Towertalk
[Top] [All Lists]

[Towertalk] tower pulleys

To: <towertalk@contesting.com>
Subject: [Towertalk] tower pulleys
From: w5hpm@sbcglobal.net (Mac Mail W5HPM)
Date: Wed, 31 Jul 2002 20:10:10 -0500
I experienced the same situation with my HyGain 72'  .. HyGain was out of
stock..  went to my friendly local machine shop.. had three made from
stainless steel  ..  still have 2 extras..  go for it.. mac/mc
----- Original Message -----
From: Larry Emery <k1uo@prexar.com>
To: <Towertalk@contesting.com>
Cc: <k1uo@prexar.com>
Sent: Wednesday, July 31, 2002 5:04 PM
Subject: [Towertalk] tower pulleys


I am trying to refurbish an EZ-Way 72ft HD tower and am in need of a source
to change out a couple of wire rope pulleys that have worn down on one side
over the years.  EZ-Way is of course out of business and all possible local
sources dont deal in wire rope pulleys except the 'garage door' boys but
those pulleys wouldn't stand the working pressures required.

The wire rope size used is 3/16 aircraft cable and the two sizes of pulleys
are as follows:

2 1/2 in. overall diameter with a center bearing hole for a 3/8 in. bolt.
The pulley width is 3/8 in.

3 in. overall diameter with a center bearing hole for a 3/8 in. bolt.  The
pully width is 3/8 in.

Does anyone have any ideas as to where I might get replacement wire rope
pulleys as close to these sizes as possible?

Thanks es 73
Larry K1UO


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


<Prev in Thread] Current Thread [Next in Thread>