John,
If you modeled your beam where did the difference come from?
Randy
AC7NJ
-----Original Message-----
From: towertalk-admin@contesting.com
[mailto:towertalk-admin@contesting.com] On Behalf Of kk9a@arrl.net
Sent: Saturday, July 13, 2002 6:43 AM
To: towertalk@contesting.com
Subject: [Towertalk] OWA Yagis
Does anyone have any experience with the OWA design yagis. Is there any
advantage other than low SWR and direct 50 ohm feed? I modeled the 15m
6el
X 36' boom and compared it to my DX Engineering 15DX-6 with the same
boom
length and the DX Engineering had more gain throughout most of the band.
Are there losses in the DX Eng. hair pin match or higher SWR that would
make
the OWA come out on top?
73,
John
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take
an additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|