Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Towertalk] silver solder ok for Ground wire to rod ?

from [K9MUF@aol.com] [Permanent Link][Original]
To: <towertalk@contesting.com>
Subject: [Towertalk] silver solder ok for Ground wire to rod ?
From: K9MUF@aol.com (K9MUF@aol.com)
Date: Wed, 7 Aug 2002 16:21:53 EDT 
I don't understand all the fuss about ground wire connections having to be 
cadwelded
etc. That lightning strike has just traveled hundreds or thousands of feet 
through the air to get to that connection. It is not going to be stopped by a 
few thousands of an inch or a little corrision in the connection.

Don  K9MUF
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Towertalk] Rohn 25G Questions, n4kg@juno.com
Next by Date:  [Towertalk] Ground loops, K9MUF@aol.com
Previous by Thread:  [Towertalk] silver solder ok for Ground wire to rod ?, Richard M. Gillingham
Next by Thread:  [Towertalk] silver solder ok for Ground wire to rod ?, Mark Beckwith
Indexes:  [Date] [Thread] [Top] [All Lists]