Towertalk
[Top] [All Lists]

[Towertalk] coax dummy load dielectric

To: <towertalk@contesting.com>
Subject: [Towertalk] coax dummy load dielectric
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Fri, 9 Aug 2002 09:54:26 EDT
In a message dated 8/9/02 5:40:30 AM Pacific Daylight Time, 
w5mc@sbcglobal.net writes:

> I have a new to me Bird 8135 load  rated at 150 watts.. it required that the
>  diaphragm and  O ring seals be replaced.. what type of oil might I use  .. 
I
>  am thinking of using Mobil one.. any suggestions please.

    Hmm, might be flammable. Most of the liquid-filled dummy loads I've seen 
used mineral oil from the drugstore.

Cheers,
Steve   K7LXC
TOWER TECH 

<Prev in Thread] Current Thread [Next in Thread>