I have had good luck with shrink tubing and plain old Scotch 33 tape. Both
have help up for several years so far. I cut back the ole covering just
enough to clean the joint and put in a new ss screw with antioxidant.
Tony
N2TK
-----Original Message-----
From: towertalk-admin@contesting.com
[mailto:towertalk-admin@contesting.com]On Behalf Of K9AJ
Sent: Friday, September 20, 2002 12:03
To: towertalk@contesting.com
Subject: [Towertalk] 402CD coil mods
Hello All,
I wonder if those who have modified the loading coil assembly on the
CushCraft 402CD (replace the existing screws that attach to the coil w/
stainless steel bolts & locking nuts) can tell me what material they used
to re-seal the loading coil assembly? If shrink tubing, what size (the
aluminum tubing the coil is mounted on is 5/8")? Would high quality
electrical tape work? Any thoughts regarding this mod?
Thanks,
Mike/K9AJ
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|