on 9/26/02 11:00 PM, Ronald KA4INM Youvan at ka4inm@tampabay.rr.com wrote:
>> I'm having problems installing two piece N connectors of RG214.
>
>> Anyone have any "pearls of wisdom" they'd like to share off-line with me?
>
>
> Sure, they make various sized "N" connectors for various sized coaxial
> cables. Get the correct connector for RG214/RG-8.
> RG-214 is tight, RG-8 is a bit loose in the correct connector.
> (The center wire might have to be filed into round in the correct
> connector with some cables.
You may wish to try another option of N-connector type as well. Cable
Experts sells a two piece N connector that is really nice. Works up to
about 2 GHz, so it's not as good as a standard type N. The center pin and
main body are soldered onto the coax just like a PL-259. The the gasketed,
knurled shield nut screws down on top of it all. It's great.
www.cablexperts.com
73,
Jon
NA9D
-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)
Life Member: ARRL, NRA
Member: AMSAT, DXCC
http://www.qsl.net/ke9na
"A life lived in fear is a life half lived."
|