In a message dated 9/27/02 6:12:47 AM Pacific Daylight Time, ogden@us.ibm.com
writes:
> My target
> would be the U.S. Towers 55', three-section crank up.
>
Which series - MA, HDX, what? Mucho differences between the different
types.
> I currently have about 2.75 yards of concrete in the ground, in an
> irregular 3 x 4' pattern, about 4-5' deep. Could I use this as the base
> for the crankup?
Maybe - see question above.
> I would cut off the current mounting leg connectors,
> drill fairly deep holes in the concrete and use construction epoxy to hold
> the new mounting bolts for the crank-up. Should I pour more concrete next
> to the current mass (and maybe drill a few connecting rebar holes to link
> the two "pours" together)?
What's the manufacturer's spec for the new base?
Cheers,
Steve K7LXC
TOWER TECH
|