Local friend, K4MZ, has acquired a Dynatech coaxial relay. The former owner
provided no specifications other than 12VDC, 500 W and DC to 1000 mhz.
There are 3, N connectors for the cables. The big mystery is what to do
with the 6 terminal pins on the side. The pins are divided
3 each between IND (COM, 1, 2) and PWR (+A, -B, 2).
The seller had the general specs of the relay, but did not know what
inputs/outputs applied to the pins.
K4MZ tried DYNATECH on the internet but came up with nothing. Dynatech
relays appear to be in common
use. Does the company operate under a different name?
Mike would like to acquire a spec sheet if available.
Replies should go direct to k4mz@nettally.com
Relayed to TT by
INK N4OO
|