| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [Towertalk] 8 pole water tight plu for rotor cable. |
| From: | aa4lr@arrl.net (Bill Coleman) |
| Date: | Thu, 3 Oct 2002 22:54:49 -0400 |
On 9/29/02 8:15 AM, Jon Ogden at na9d@speakeasy.net wrote:
>I'll second Phil's comment! I took his advice a couple of weeks ago when I
>put mine up. I varied slightly from him. They make six pin trailer plugs
>as well. So I used a six pin and a 4 pin just so that I wouldn't get them
>confused.
I did the same thing -- but I used two four-pin sets and just reversed
one of the sets. That way, you can't plug it in backwards.
Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Towertalk] 8 pole water tight plu for rotor cable., Bill Coleman |
|---|---|
| Next by Date: | [Towertalk] Aircraft Cable, Bill Coleman |
| Previous by Thread: | [Towertalk] 8 pole water tight plu for rotor cable., Bill Coleman |
| Next by Thread: | [Towertalk] Re: [Dx-qsl] virus in - THE END, K7LXC@aol.com |
| Indexes: | [Date] [Thread] [Top] [All Lists] |