I am going to put the following three yagis up on my
Rohn 25 using a M2 2800 rotator. My 24 foot mast
(2"OD)is too heavy (98 lb)at that length so I want
to cut it off and use only that which is necessary to
mount the three Yagis. Are my spacings adequate for
non interaction? Can I go closer or further apart?
top of mast = Comet GP9 2/440 fm vertical
1 foot down from top of mast = M2 2M5WL 17 element,
33' boom 2 meter yagi with support rope.
5 foot down from top of mast = M2 6M7JHV 7 element,31'
boom 6 meter yagi with support rope
13 feet down from top of mast = Force 12 5BA 5 band
Yagi with support rope. That will be no more than 1
foot from top of tower.
This makes only 14-15' above the tower and whatever it
takes to the rotator, which I hear will only fit in
the top most part of Rohn 25?
Steve K7AWB
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com
|