If I may point out another item. You mentioned that you're using air
variables. Those will be OK as long as you limit your power to 100
watts or so. If you're going to use an amp, then you'll be pumping 3Kv
at some amperage through those, especially the series (gamma) cap. If
this is the case, then you'll need to procure vacuum variables with at
least 3Kv or 5Kv rating. I did the air variable bit, and on 100 watts
it was acceptable. When I eventually brought an amp online, the arcing
across the cap plates could be seen from the house! You'll see. Cu on
Topband, Phil KB9CRY
Jim Johnson - KC4HW wrote:
>Want to thanks everyone for the help on the tower. We added the
>additional air variable as an Omega Match and is worked real good.
>
>We are planning to be on 160 during the CQWW SSB..
>
>Thanks again for the help.
>
>Jim Johnson, KC4HW
>Melbourne, Florida
>http://www.kc4hw.net
>DXCluster RF Connection: 144.95
>Telnet://kc4hw.homelinux.net:8000
>_______________________________________________
>AN Wireless Self Supporting Towers at discounted prices,
>See http://www.mscomputer.com
>
>Wireless Weather Stations now $349.95. Call Toll Free,
>888-333-9041 for additional information.
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
|