In a message dated 11/10/02 5:47:39 AM Pacific Standard Time,
dcretty@mindspring.com writes:
> I just ordered a 64 ft Trylon tower and have the following questions. I
have
> a 10 ft 2" steel mast and plan the following installation. A Sommers hf
> antenna with 40 meters on the bottom and a 2 meter fm beam on the top. I
> have the hf antenna.
> My questions are these:
>
> Is the spacing ok and is it that important that the 2 meter fm antenna
> be insulated from the mast.
The rotator shelf for the Trylon will be three feet below the top;
allowing a foot for the rotator, there'll be two feet of mast in the tower
and about eight feet sticking out. That's plenty of mast for another antenna.
You can mount the 2M antenna just about anywhere above the tribander you
want - I don't think the tribander will 'see' the little antenna. While
Mosleys are notorious for not allowing any antennas nearby, I don't know of
any similar problems with any other antenna so mount the 2M where you can. In
this case, it might be a practical spacing problem - how high are you willing
to stand on the tower and push up and tighten the 2M antenna?
The only insulated antenna 2M application I've ever seen was for a
VHF/UHF satellite installation. I don't know of any reason why the 2M would
have to insulated. What does the manufacturer say?
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
|