To: | <towertalk@contesting.com> |
---|---|
Subject: | [Towertalk] small-diameter aluminum |
From: | k9zm@frontiernet.net (Greg Gobleman) |
Date: | Wed, 4 Dec 2002 05:44:03 -0600 |
> Thanks to all who responded. I suppose the original article involved > tubing out of a desire to make the antenna as light as possible, but I > think the aluminum rod's weight would still be acceptable, and it certainly > would be easier to bend smoothly. Off to Home Depot... > > 73, Pete N4ZR > Sometimes a tower is just a tower I didn't read down and see this. Your probably right about the bending as arrow shafts are very stiff. I think it could still be done with the sand trick. 73 Greg K9ZM |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Towertalk] small diameter aluminum tubing, Greg Gobleman |
---|---|
Next by Date: | [Towertalk] (no subject), David Robbins |
Previous by Thread: | [Towertalk] small-diameter aluminum, Pete Smith |
Next by Thread: | [Towertalk] VEE Beam (Summary) Thanks, Robert Thain |
Indexes: | [Date] [Thread] [Top] [All Lists] |