Towertalk
[Top] [All Lists]

[Towertalk] Disassembling A4 elements

To: <towertalk@contesting.com>
Subject: [Towertalk] Disassembling A4 elements
From: n4kg@juno.com (n4kg@juno.com)
Date: Tue, 24 Dec 2002 11:21:44 -0600
Another technique is to heat the larger tube,
presumably with a propane torch, using an attachment 
to fan out the flame, and then cool the smaller tube
with cold water.

Tom  N4KG

On Mon, 23 Dec 2002 16:17:00 -0500 "Kashinsky, Jeff"
<jeff.kashinsky@cingular.com> writes:
> I recently purchased a used A4 and D3W. I managed to bring the 
> elements home
> in 1 piece as they were strapped to the side of a 50 ft crankup! 
> Wish I had
> pictures as it was a sight to see.
> 
> Now I want to disassemble the elements and clean it all up before I 
> put it
> up. Unfortunately they won't untelescope. The antenna does not look 
> in bad
> shap but the elements won't budge.
> 
> Suggestions Please.
> Jeff Kashinsky W2UA
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices, 
> See http://www.mscomputer.com 
> 
> Wireless Weather Stations now $349.95. Call Toll Free, 
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com

<Prev in Thread] Current Thread [Next in Thread>