Thanks all for all the info on the Ham M vs. Ham IV rotors.
Here's one final question:
I need my new Ham M to rotate through South as it's going to be an azimuth
rotor for my satellite station.
Where can I get a "real" needle plate for this configuration. My control
box is the old brown style CDR box and for now I just took and made my own
plate. It starts at 0 degrees on the left and goes to 360 moving to the
right. So I think it's correct.
My only question is if there is some place I can purchase a "real" indicator
plate and not a modified Xerox copy. Do these exist?
Thanks,
Jon
NA9D
-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)
Citizen of the People's Democratic Republik of Illinois
Life Member: ARRL, NRA
Member: AMSAT, DXCC
http://www.qsl.net/na9d <- Updated on 1/12/03!!!
"A life lived in fear is a life half lived."
|