Towertalk
[Top] [All Lists]

[TowerTalk] Guy location correction

To: <towertalk@contesting.com>
Subject: [TowerTalk] Guy location correction
From: henry@mrlistersir.com (Henry)
Date: Thu Jun 12 16:04:59 2003
If you do as mentioned, "take the length from the tower to the guy and 
double it", you'll be off by a factor of 3^(1/2)/2 or about .87. Remember 
your HS trig and the relationship of the sides of a 30-60-90 triangle. Then 
you have to orient the triangle correctly on your plans. The hypotenuse is 
the distance from the tower to the guy anchor, the long leg is half the 
distance from guy anchor to guy anchor.

The relationship of the triangle is             hypotenuse = 1
                                                 short leg      = 1/2
                                                 long leg        = 
3^(1/2)/2 or about .87

for example, if the distance from the tower to the guy anchor is 50ft. The 
distance from anchor to anchor will be

(2)(.87)(50)ft. + 85ft.

This result is very different from 2 x 50ft = 100ft.

Given the tolerance levels needed here, Steve's method probably is the easiest.

Given that I'm a HS math teacher and am in math grad school. It's a bit 
easier for me to remember my HS trig.




end


Henry
KB7RTA
henry@mrlistersir.com 


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Guy location correction, Henry <=