Towertalk
[Top] [All Lists]

[TowerTalk] Copper strap v. Al question

To: <towertalk@contesting.com>
Subject: [TowerTalk] Copper strap v. Al question
From: k5uj@hotmail.com (Rob Atkinson, K5UJ)
Date: Thu Jun 19 19:02:40 2003
I have a question re the copper grounding strap:  When visiting a small 
local 250 w. AM broadcast tx site last year, I noticed the base of the tower 
insulator on the ground side was strapped to the radial ring with 4 sections 
of what appeared to be aluminum flashing.  The insulator sat on a square 
concrete base and the straps, one on each side, came down off the insulator 
base where the spark gap was to the buried radials.  Each Al strip was about 
4" wide.  I was surprised to see a metal other than copper being used.  (For 
no reason that makes any sense, I expected to see the whole concrete base 
covered with copper--my ham tendency to want to over-engineer everything.)  
I may have been mistaken but I don't know what else it could have been--if 
it looks like aluminum, walks and quacks like it, it's aluminum.  Is Al 
flashing an acceptable substitute for copper?  It's easier to find and 
cheaper.  I imagine it presents bonding oxidation problems however.

Rob Atkinson
K5UJ
k5uj@hotmail.com

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*  
http://join.msn.com/?page=features/virus

<Prev in Thread] Current Thread [Next in Thread>