----- Original Message -----
From: "j.a.hermans" <j.a.hermans@skynet.be>
To: <K7LXC@aol.com>; <rich@n7tr.com>; <towertalk@contesting.com>
Sent: Monday, July 14, 2003 11:16 AM
Subject: Re: [TowerTalk] Tram Cable type?
> Use stainless steel 4 or 5 mm.
> You will be out of troubles for years.
> I just wonder if temperature will change behaviour
> Jos
>
> ----- Original Message -----
> From: <K7LXC@aol.com>
> To: <rich@n7tr.com>; <towertalk@contesting.com>
> Sent: Monday, July 14, 2003 4:31 AM
> Subject: Re: [TowerTalk] Tram Cable type?
>
>
> > In a message dated 7/13/03 10:22:26 AM Pacific Daylight Time,
> rich@n7tr.com
> > writes:
> >
> > > What type of cable is everyone using for raising and lowering Antennas
> using
> > > a tram system? I need to replace my 20 year old stuff with something
> new,
> > > and wondering what is being used, and where to purchase.
> >
> > Some 3/16" galvanized wire rope cable available at any hardware
store
> is
> > plenty for 98% of ham jobs. Even smaller will work okay if you're not
> doing
> > anything huge - i.e. big 40M beams, etc.
> >
> > Cheers,
> > Steve K7LXC
> > TOWER TECH
> > _______________________________________________
> >
> > See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any
> questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
|