[TowerTalk] PL-259 Threads

[W2fca@cs.com (W2fca@cs.com)]

Hi
Since the outside of most CATV hardline is aluminum, why not try just screwing 
it on?
I did that with a larger cable and larger connector. The trick was holding the 
cable and I used a couple of the "strap wrenches" . They held the cable without 
crushing it.

Frank
W2FCA


>I have some CATV hardline with an outer diameter of about .410 and seems
>that if I could cut the proper threads I could screw a PL-259 right on
>the cable. ?