Towertalk
[Top] [All Lists]

[TowerTalk] Anchor Bolt Cage

To: <towertalk@contesting.com>
Subject: [TowerTalk] Anchor Bolt Cage
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Tue Jul 29 20:23:18 2003
In a message dated 7/29/03 4:03:51 PM Pacific Daylight Time, w7zr@citlink.net 
writes:

> I was thinking of using a sheet of
>  plywood at top and bottom to better hold the bolts in the desired 
positions.
>  Anyone have ideas or pictures of good ways to build such a device?

    Yep. I do it all the time. Put the piece of plywood over the base and 
then spray paint it to mark the hole locations. Drill and assemble with the 
bolts 
and then test fit to tower base. Pour. 

Cheers,
Steve     K7LXC
TOWER TECH -
Professional tower services for commercial and amateur 
<Prev in Thread] Current Thread [Next in Thread>