That is why I use Epson printers .. I can get the non-OEM cartridges .. NEW
... CHEAP .. and, in over 70+ cartridges, only had to throw ONE away .. my
cartridges cost about 3-5 bux apiece, and I don't get my fingers "dirty" ---
HIHIHI ... Will print my own for this weekends AA6DX/Light operation from
Trinidad Head Lighthouse (Far Northern California) .. and, 8" X 10"
certificates, too...--- As to getting back to the tower (harrrrumph)
subject, the "tower" for this operation, holding a 3 el CC tribander, will
be an Alinco Roof Tower ... after all, we are operating from 300' or so
above the Pacific Ocean .. and another 20' or so above ground will be swell.
However .. in the wintry winds, would not be good idea. The roof was blown
off of the USCG quarters there this last winter, ergo no one lives there now
.. and we (W6DSB) are taking a travel trailer up there as part of the
operation, which would be, a few months from now, highly NOT be recommended,
as to .. falling off the cliff ...
Going to stake down the tower, but not use an electric rotator ..rather, the
ARMSTRONG method. The roof tower, ground mounted, will have a 10' mast
inserted, so total above "ground" --- errr... make that "rock" will be
approx 14 feet or so. Dipoles will be held up at about 30' by push-ups and
masts.
Vertical will be GAP // mounted catch as catch can. Any suggestions?
73 --- Mark, AA6DX /LIGHT
From: "Jim White, K4OJ" <k4oj@tampabay.rr.com>
To: "Bob Gates" <regates@kingwoodcable.com>
Cc: "Tower Talk" <towertalk@contesting.com>
Sent: Wednesday, August 13, 2003 7:31 PM
Subject: Re: [TowerTalk] Re: [CQ-Contest] Printing QSL Info on Cards
> I cannot imagine it being cheaper to print the entire QSL - the ink my
> printers use is too costly now - cannot imagine how much I would go
> through in printing a thousand cards! For a round number - say I spend
> 60 dollars for QSLs... a black ink cartridge alone is 15 bucks... I
> sorely doubt 4 of them could print 100 QSLs - which are in multi-color,
> too...
>
> Do not think it is an option...
>
> To tell you the truth I cannot wait for the bugs to get ironed out of
> LOTW... I REALLY hate all the expenses associated with QSLing.
>
> Jim, K4OJ
>
>
> Bob Gates wrote:
> > Has anyone bothered to compare the costs of printing QSLs, with or
without data
> > labels, on a home PC using photo paper. It would seem to be
prohibitively
> > expensive. Or, are the majority of you getting them at a print shop and
merely
> > adding labels. Sorry for the stupid question, but I've been away too
long.
> >
> > Regards,
> > Bob KG7KW
> > _______________________________________________
> >
> > See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|