Speaking of Bob.. W7BA, I just had 2 tailtwisters re-built by him. He
also added a pigtail and connector option instead of the screw
terminals.
He was very reasonable!
73
Jim W7RY
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of David Cook
Sent: Saturday, August 16, 2003 4:30 PM
To: K7LXC@aol.com; towertalk@contesting.com
Subject: RE: [TowerTalk] Rotator control refurb
Thanks for the reference Steve, I'll keep his info on file for the
future.
I've already placed an order for the Rotor-EZ board, which is the best
of
all solutions I've seen so far. And yeah, per your previous comment
about
the state of the art back in the 70's, I can certianly understand why
the
controller was so simple in the first place. But, and as I found out, I
suspected that a lot of hams would have devised various means to
modernize
the controller. The Rotor-EZ mod is really impressive and way better
than I
was hoping for when I posted the question to the group. So I'm really
pleased with the suggestions and help. This TowerTalk group is just
wonderful (and so is Champion Radio :-).
BTW, thanks again for the tower section Steve, I hope you got my other
note
to you about it.
73, Dave, WA0TTN
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of K7LXC@aol.com
> Sent: Saturday, August 16, 2003 6:13 AM
> To: davec@netdave.com; towertalk@contesting.com
> Subject: Re: [TowerTalk] Rotator control refurb
>
>
> In a message dated 8/15/03 9:36:06 PM Pacific Daylight Time,
> davec@netdave.com writes:
>
> > Thanks for the info Jim. Yeah, I'm not questioning the
> reason for the brake
> > switch, I was just wondering why one couldn't automate the
> "coasting" delay
> > rather than relying on the operator to determine when
> rotational inertia
> has
> > settled down.
>
> Bob, W7BA, does my rotator work and has a REAL simple
> circuit that only
> has a couple of components that'll give you a little brake
> delay. It's so
> simple I wonder why there are whole QST articles with logic
> circuits and boards to
> do the same thing. You can contact him at W7BA@comcast.com.
>
> Cheers,
> Steve K7LXC
> TOWER TECH
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers",
> "Wireless Weather Stations", and lot's more. Call Toll Free,
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|