Towertalk
[Top] [All Lists]

Re: [TowerTalk] double figure 8 bend

To: richard@karlquist.com, eric@k3na.org, towertalk@contesting.com
Subject: Re: [TowerTalk] double figure 8 bend
From: K7LXC@aol.com
Date: Tue, 26 Aug 2003 08:20:42 EDT
List-post: <mailto:towertalk@contesting.com>
In a message dated 8/25/03 7:52:03 PM Pacific Daylight Time, 
richard@karlquist.com writes:

> I learned about this knot several years
>  ago (I think it was here on TT).  I was
>  never much good with knots before, but
>  this knot is extremely easy to tie; you
>  virtually can't goof it up.  It is now
>  the only knot I use (either the single
>  or double).  I have never seen one of these
>  untie themselves; but on the other hand
>  I can usually get them untied when I
>  want to, even if high tension has been
>  applied. 

    I agree. The reason why I don't use it more is that it's a physically 
larger knot than a bowline. When you need another inch in your rigging, the 
smaller knot wins every time.

Cheers,
Steve    K7LXC
TOWER TECH 
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>