At 05:11 PM 8/29/03 -0400, Jerry Keller wrote:
OK, so my elbow-poking comes back into my own ribs... ow!
Instead of kidding around, I should have taken the time to read further in
the manual for the Yaesu G-800DXA rotator I'm in the process of installing.
In the illustration on page 11, it very clearly shows a long 9mm bolt
(supplied) going through the mast clamps AND through the mast.
Oh, well, live and learn. :-)
Don't feel bad, Jerry. Both of mine are pinned, but in each case the idiot
who drilled the mast got the hole just far enough off line so that I
couldn't get the bolt through. I was the idiot in the second case, but the
first one was a supposed machinist.... I wound up using a smaller diameter
bolt in each case to do the pinning. It has worked OK so far (8 years in
one case).
73, Pete N4ZR
The World HF Contest Station Database was updated August 4.
123 stations were added or updated.
Are you current? www.pvrc.org/wcsd/wcsdsearch.htm
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|