Towertalk
[Top] [All Lists]

Re: [TowerTalk] Re: TowerTalk Digest, Vol 10, Issue 22

To: btakacs@nccw.net
Subject: Re: [TowerTalk] Re: TowerTalk Digest, Vol 10, Issue 22
From: jparr@bgcfreedom.com
Date: Wed, 8 Oct 2003 09:11:30 -0400 (EDT)
List-post: <mailto:towertalk@contesting.com>
The Universal I put up was used, and I found the same thing with the old
bolts, very rusty. I am in a very salty/hot climate, so stainless was a
must. Since it never gets cold, I didn't worry about the steel getting
brittle in the winter.

Jeremy

On Wed, 8 Oct 2003 btakacs@nccw.net wrote:

> I just took down two Universal Towers this past week and I am finding the
> 3/8 bolts are almost completely rusted through in the center of the
> bolt..  Both of these towers have been up about 10 years.  There must be
> some corrosive action on these bolts in the center of the tower.  Perhaps
> stainless bolts would solve this problem.  Kind of scary when they use only
> one bolt at each leg.
> Bill/K8VP

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>