Any suggestions on the best way to route the coax from
the tower to an antenna mounted on a TIC ring?
Since, in my case, the TIC is mounted just above guy
wires, I cannot drape the coax below the antenna to
the tower. The antenna has a boom truss support mast
so I think that running the coax up the antenna's
truss support and draping it over to the tower is the
right way to go. (The anchor point on the tower will
be at the same height as the top of the truss
support). Comments anyone?
Thanks,
Mike N2MG
________________________________________________
PeoplePC: It's for people. And it's just smart.
http://www.peoplepc.com
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|