> Where is the reference database and formulae available to
> calculate the
> lead inductance of copper strapping given the width and depth in
> inches and
> the length of the copper strap in feet?
> --
> Rutherford Resources
> Stephen Rutherford
It depends on how close it is to ground. You have to estimate
the characteristic impedance of the strap as if it were a
microstrip-type transmission line, ignoring any dielectric
material. Then the inductance per foot in nanoHenrys is the
same as the characteristic impedancein ohms. A strap not
particularly close to any ground plane could easily have an
impedance in the several hundreds of ohms, hence an
inductance of several hundreds of nanaHenrys per foot. A
standard rule of thumb is 20 nH/inch or 240 nH/foot, which
corresponds to a characteristic impedance of 240 ohms. This
approximately the impedance of a strap that is spaced 10
times its own width from a ground plane.
For further reading, see Reference Data for (Radio) Engineers.
Rick N6RK
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|