Jerry:
Look in your yellow pages under concrete suppliers to find a source.
I normally specify "Masterflow 928" by MasterBuilders or equal. Sika chemical
is another manufacturer. What you want is a non-metallic, non-shrink pre
package grout. Follow the manufactures directions and you should be ok.
Non-metallic doesn't stain as it weathers.
Regards
Hank Lonberg, P.E.,S.E. / KR7X
Lonberg Design Group, Ltd.
> My tower sits on a Tee-shaped steel base plate that's on the threaded J-bolt
> ends about 3 inces above the concrete. I've been told I should put "grout"
> under
> the plate, between the Tee-plate and the concrete, enclosing the 3 exposed
> J-bolts. If this is advisable, what kind of "grout" is used for this, and
> where
> do I get it?
> Advice appreciated...always. Jerry K3BZ
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
> and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|