Greenlee sells a device(vacuum) to pull in a string in conduit. Works just
really nice(have one at work). I suspect that a wet/dry vac would work fine
also. I have used both methods and they both have their place. Be very
careful with the CO2(high pressure) that you know where the end is and
nobody is standing near it or in line. I have seen water shoot up in the
air 30 feet. Not nice either rusty nasty water. Also rocks and other
foreign objects can come out like a gun. I have heard of red plastic wire
nuts killing rats at 100 feet.
----- Original Message -----
From: "Chris BONDE" <ve7hcb@rac.ca>
To: "Jack Myers" <jackqm@oregontrail.net>; <towertalk@contesting.com>
Sent: Monday, November 17, 2003 1:00 AM
Subject: Re: [TowerTalk] Putting a pull rope in conduit.
> What would happen if you used a shop vacuum at one end?
> Would it do the string through by itself or would it have helped you to
use less
> 'pushing' air?
>
> Chris opr VE7HCB
>
> From: "Jack Myers" <jackqm@oregontrail.net>
> To: <towertalk@contesting.com>
> Date sent: Sat, 15 Nov 2003 11:41:21 -0800
> Subject: [TowerTalk] Putting a pull rope in conduit.
>
> [ Double-click this line for list subscription options ]
>
> Thought I would pass this along as it worked very well for me.
> Earlier this fall I buried 350 Ft of conduit out to my two new towers
> and just got around to putting a pull rope in them today. I decided
> that instead of the fish tape method I would blow a string through the
> conduit as I have seen done once with the local power company. I used
> masons string for the shoot through the conduit. I made a cap for the
> end of the conduit with the lid off of 3m #33 tape container. I
> drilled two holes in it, one about 1/8 diameter the other just big
> enough to squeeze the nozzle of my air blower in it. I then threaded
> the masons string through the cap and then poked it through a red
> mechanics rag (the ones you get at the auto parts store) and to keep
> it from pulling back through the rag I tied a #12 washer to the end of
> it. I took my air compressor (nothing special about it) out to the end
> of the conduit with a full tank of air (20 gal). I stuffed the rag
> loosely in the conduit then stuck the cap on and put the nozzle in
> and let her rip. The main thing is to have the masons string able to
> feed easily and it will shoot through fast. I ran out of air about 1/2
> through and had to wheel my compressor over to an AC outlet and air up
> again. Second tank I got it through no problem. I then pulled a larger
> (parachute cord) through. The second conduit I decided to try it with
> just my hand cupped over it instead of the cap and it worked just as
> well and was less fuss. I was not sure if it would work but it worked
> great! Took me less than an hour from start to finish to get my pull
> ropes in place. 73 Jack NK7J
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers",
> "Wireless Weather Stations", and lot's more. Call Toll Free,
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|