Towertalk
[Top] [All Lists]

RE: [TowerTalk] Guy Wire distance

To: "TowerTalk" <towertalk@contesting.com.>
Subject: RE: [TowerTalk] Guy Wire distance
From: "tom.dixon" <tom.dixon@xtra.co.nz>
Date: Sat, 6 Dec 2003 11:37:09 +1300
List-post: <mailto:towertalk@contesting.com>
Morning All
I am about to erect my tower. I have read the last couple of postings
concern the above subject. This 60-80% that is been mentioned. Is that
the height TO the guy point ON the tower or is it the 60-80% of the
towers height out from the base to the point on the ground where the guy
will be attached?? Please help I am now confused???

Tom Dixon
zl2hgr@xtra.co.nz

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of RICHARD BOYD
Sent: Saturday, 6 December 2003 11:11 a.m.
To: ccrum@dot11net.com; TowerTalk; Lee Buller
Subject: Re: [TowerTalk] Guy Wire distance

I've always heard 80% of the tower height.  But, in talking to Rohn
engineers about a Rohn 80 years ago, it was clear you can guy closer and
make up for it in stronger guy material and greater guy tension,
probably stronger anchors too.
73 - Rich, KE3Q
  ----- Original Message ----- 
  From: Lee Buller 
  To: ccrum@dot11net.com ; TowerTalk 
  Sent: Friday, December 05, 2003 5:11 PM
  Subject: Re: [TowerTalk] Guy Wire distance


  I think that you will get a response from many....do what the
manufacture recommends in the specs of the tower.
   
  Usually, my rule of thumb is that the guys have to be out from the
tower at 60% of its height.  Now, the lower guys you might want to
change that because there will be a lot of cable hanging on the lower
guys.  You can push those in and make a 45 degree guy point.  In other
words, guy the bottom two at 100% of the height at the guy point on the
tower and make the top two at 60% of the height of the guy point on the
tower.
   
  Now, there are a lot more experienced people on the list than me....so
listen to them as well.
   
  Lee - K0WA


  rum <ccrum@dot11net.com> wrote:
  I'm new to the list so this may have been asked before, but I'm
thinking 
  about putting up a 150 ft tower in the near future. Does anyone know
how 
  to calculate the distance away from the tower and number of guys (in 
  elevation) required for such a structure. Sorry, this is my first
tower 
  so this is all new to me.

  Regards,

  Cameron

  _______________________________________________

  See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk
  _______________________________________________

  See: http://www.mscomputer.com  for "Self Supporting Towers",
"Wireless Weather Stations", and lot's more.  Call Toll Free,
1-800-333-9041 with any questions and ask for Sherman, W2FLA.

  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>