Towertalk
[Top] [All Lists]

Re: [TowerTalk] Replacement Cable for Wilson MT61

To: "Michael Tope" <W4EF@dellroy.com>,"TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Replacement Cable for Wilson MT61
From: "Jim Lux" <jimlux@earthlink.net>
Date: Tue, 16 Dec 2003 22:05:47 -0800
List-post: <mailto:towertalk@contesting.com>
Wire rope (aka cable) isn't all that exotic a material.  What's the diameter
and number of strands? There's several places in L.A. that sell rigging
stuff of various kinds.  What are the ends like (thimbles and swaged or
something else?)

----- Original Message -----
From: "Michael Tope" <W4EF@dellroy.com>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Tuesday, December 16, 2003 9:44 PM
Subject: [TowerTalk] Replacement Cable for Wilson MT61


> Our club has an old Wilson MT-61 tubular crank-up tower which
> is similar to the U.S. Tower MA-550. My friend is going to buy
> it from us and put it up at his new QTH, but he needs to replace
> the cable before erecting it. Any recommendations on what kind
> of cable I should use and where we can get it (I seem to remember
> that U.S. Tower has a reputation for not being helpful in this
> regard).
>
> Thanks,
>
> Mike, W4EF....................................
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>