David
what size/type tower is this on ??
Dan N8DCJ
--- SGTOKIE@aol.com wrote:
> I think I beams may be a better choice than
> pipe....I have seen I beams on a
> 300 ft commercial tower and it was a nice
> install....i used 6" pipe 14' long
> for my elevated guy posts. i had the holes dug
> 18"x4' with an auger, at the
> bottom i welded 6 scrap plates that were 6"x12"x1/2"
> (3 at bottom 120 deg and 3
> above opposite 120deg) for the top i used the same
> size of scrap and cut 3
> holes for clevis pins......i used 6 bags of
> quickcrete and about 6-5gal buckets
> of broken bricks as coarse aggragate......they are
> pretty solid and i may even
> fill them up with concrete this
> summer..............in reflection, the i beam
> would be easier because of the elemination of
> welding the spreaders to the
> bottom and you can cut attachment holes (after you
> cut and dress a portion of the
> I beam). it will make a good install......i will
> try to remember to take a
> camera with me when i go to okc and get some pics of
> the elevated I beam guy
> posts...73 de kd5qwo, david howard
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting
> Towers", "Wireless Weather Stations", and lot's
> more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
>
http://lists.contesting.com/mailman/listinfo/towertalk
__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you?re looking for faster
http://search.yahoo.com
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|