Towertalk
[Top] [All Lists]

RE: [TowerTalk] Fiberglass UV

To: "Pete Smith" <n4zr@contesting.com>,"Joe Subich, K4IK" <k4ik@subich.com>, <towertalk@contesting.com>
Subject: RE: [TowerTalk] Fiberglass UV
From: "WD4K" <WD4K2@charter.net>
Date: Tue, 23 Mar 2004 17:54:25 -0600
List-post: <mailto:towertalk@contesting.com>
Are not the polygon guys made from solid material with a formula more than
glass matt, resin and topcoat over a hollow tube?  Just asking. I see no
common ground between these two products.  73, Tommy

-----Original Message-----
From: Pete Smith [mailto:n4zr@contesting.com]
Sent: Tuesday, March 23, 2004 5:52 AM
To: WD4K; Joe Subich, K4IK; towertalk@contesting.com
Subject: RE: [TowerTalk] Fiberglass UV


At 01:39 AM 3/23/04, WD4K wrote:
>Nonsense?..not so when your own comments even limit the life expectancy to
>10 years or so, and that is probably a stretch..time will tell.


Hmmm -- if you're right, the guys who invested in Polygon pultruded guy
material for their big antenna farms are in bad trouble.  If the SteppIR
elements can be expected to fail from wind loading in a few years, what
about guys that periodically come under thousands of pounds of tension?

73, Pete N4ZR
2671 calls now in the
World HF Contest Station Database
at www.pvrc.org/wcsd/wcsdsearch.htm



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>