For sale:
1. New in box (purchased 2001) Heights acme screw
drive, 1 1/4 inch diameter. This is the new
improved version (old version was 1 inch diameter).
It will retrofit to pre-1995 hinge plates with
the including hardware. This screw will typically
lift 64 feet of tower, whereas the old one was
typically good for 48 feet of tower.
2. New in box Dayton 6Z403 gear motor for above.
3. Old Dayton gear motor for old Heights screw system,
well weathered. If there is sufficient interest in
it, I will wire it up and test it.
4. Pre-1995 hinge plate for 18/22/26 inch sections,
possibly available as package deal with above. Not for
sale separately.
Make offer.
Rick N6RK
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|