http://tinyurl.com/2bvc5
Here's a place...cheeeep ... Mark, AA6DX
"CW -- when you care to send the very best"
dit dit ---
From: "Steve Katz" <stevek@jmr.com>
To: "'Michael Tope'" <W4EF@dellroy.com>; "TowerTalk"
<towertalk@contesting.com>
Sent: Friday, May 14, 2004 9:28 AM
Subject: RE: [BULK] - [TowerTalk] Motorola Connectors
> Those darn no-coders! Oops, wrong place.
>
> I've seen the cable extensions (Motorola female one end, right-angle male
> installed on the other end) at my local car stereo/alarm installer's shop.
> If you have such a shop near you, you might check there.
>
> -WB2WIK/6
>
>
>
>
>
>
> Sorry this a slightly little off topic (but not nearly as much as ISO9001
> compliance). Anyone know where I can get right-angle motorola
> connectors (e.g. the standard male car radio connector). Specifically
> I need something that will change a long straight Motorola male
> plug into a right-angle that makes a nice sharp turn (there isn't
> much room between the firewall of my Ford pickup and the back
> of the radio. A short jumper cable with a Motorola female jack on
> one end and a Motorola right angle male on the other end would
> do nicely. I recently got an antenna switch (see its sorta appropriate
> for TowerTalk) that goes between my car radio and the factory
> antenna , and the switch uses a long straight male plug which won't
> clear the firewall.
>
> Thanks,
>
> Mike, W4EF............................
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|