Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pre-Form Big Grips

To: "Byron Tatum" <bjtatum@ev1.net>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Pre-Form Big Grips
From: "Tower (K8RI)" <tower@rogerhalstead.com>
Date: Sun, 23 May 2004 18:30:49 -0400
List-post: <mailto:towertalk@contesting.com>
The instructions I have are at least 4 years old and do not mention
splitting the legs (EXCEPT to finish the winding) , so I've not done that.
However I would think it would make them much easier to install.

When installing the "Big Grips", I put the guy line under tension using a
ComeAlong with a self locking grip.  I try to pretension at least at the
working tension, or a bit above.  This makes them easier to install and aids
in giving them a real bite.

I would add that installing any other than the smallest "Big Grips" takes
work, a lot of leverage, and maybe even some practice.  I used a large
screwdriver ( 14 or 16 inch as I recall) with a rectangular shank "at the
ends" This allowed me to take the curved ends around the guyline
*relatively* easy.  The last few inches can be a real bear. Particularly on
the 6000# test guy line.

The instructions caution against using tools except for splitting the
strands.  I did find the screw driver necessary to get those curved ends
around the Phillystran

Remember too, they are not reusable also the tension is "recommended" to be
10% of the rated strength of the guy line.


Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com




I have a question for the ones in the know here :
    I purchased some PLP Big-Grips recently and was given a copy of the
instruction sheets. I was surprised to see that they say to split the
strands on each leg. I don't recall ever reading this in any of the postings
or recommendations as far as using these, but maybe I was just not paying
close enough attention??
    Does anyone split the legs { separate the 4 bonded strands into 2 pairs
of strands} and install them as per these instructions?
        Thank you, Byron WA5THJ.
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>