In a message dated 7/9/2004 9:59:57 AM Eastern Daylight Time, "Keith Dutson"
<kjdutson@earthlink.net> writes:
>What is the best method to tension the guys? ?There is 6700 pound
>Phillystran at 150-113-76-38 feet on Rohn 45. ?
You mean technique or spec? You'll need something to measure the tension (10%
of the breaking strength - in this case 670 pounds). The best and cheapest tool
is the LOOS PT-2 tensioner. And it's accurate too. Seventy-nine bucks at
www.championradio.com.
Hopefully you used regular EHS steel guys to the anchor because there's no way
to measure HPTG6700 Phillystran directly - it's too big to fit into the guy
wire hook on the LOOS. In that case you'll need a Phillystran Preform grip on
the Phillystran and a Dillon tensionometer and comealong to measure the
tension. Leaving the Phillystran termination up in the air and having EHS to
the anchor keeps the Phillystran away from potential vandals and fire - both of
which are potentially fatal to Phillystran but steel guys are mostly impervious
to them.
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
888-833-3104
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|