Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ground Rod Connections

To: Wilson Lui <wilsonlui@atitec.com>
Subject: Re: [TowerTalk] Ground Rod Connections
From: Phil Camera <kb9cry@comcast.net>
Date: Fri, 16 Jul 2004 20:50:53 -0500
List-post: <mailto:towertalk@contesting.com>
If I may, Cadwelds are a registered product line made by Erico Corp of which one of them is the OneShot types. You can determine the type of mold and PN you need from the erico.com website.

Wilson Lui wrote:

You are correct. Cadweld, Exothermic, or One Shots ARE made for this
purpose. They are the same thing. To clarify, Cadweld is a company, not a
type of welding or product. Exothermic Welding, is a type of welding that
companies like Cadweld provides. One shot is a product that makes Exothermic
Welded connections, and the One Shot is a product by Cadweld. Hopefully this
helps.

Wilson Lui
ATI Tectoniks

wilsonlui@atitec.com


-----Original Message----- From: towertalk-bounces@contesting.com [mailto:towertalk-bounces@contesting.com] On Behalf Of hdmc38@bellsouth.net Sent: Saturday, July 03, 2004 9:52 AM To: Alan AB2OS; towertalk reflector Cc: towertalk@conteasting.com Subject: [TowerTalk] Ground Rod Connections

How about Cad WEld ,Exothermic,or one shots.I believe these are made exactly
for this purpose.

Joe K4XZ


From: Alan AB2OS <ab2os@att.net>
Date: 2004/07/03 Sat AM 09:19:19 EDT
To: towertalk reflector <towertalk@contesting.com>
CC: "R. Kevin Stover" <rkstover@mchsi.com>
Subject: Re: [TowerTalk] What Welder Makes Good Exothermic Bonds?

So how well would brazing with a Bernzomatic or similar Propane or MAPP torch work for bonding copper ground wires to copper-clad steel ground


rods?


Alan AB2OS
(who did manage to produce some serviceable bronze welds wth an oxy-acetylene torch a few decades ago but never mastered the art of fusion welding)


On 07/03/04 08:41 am R. Kevin Stover put fingers to keyboard and launched the following message into cyberspace:

<snip>



I suppose someone makes some wire to use in a MIG welder to weld copper but I'd be surprised if there was. Copper and brass are usually brazed or soldered. Not welded.



_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless


Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.


_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk




JOE PATRICK SENIOR PLUMBING/MECHANICAL INSPECTOR CITY OF BOYNTON BEACH

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>