Hello
Thank you for reading
I have a KLM KT34XA on a 24m high crank up tower.
Is there anyone who tried to interlace a 2 element 40m Yagi on the same boom
with the KLM ? Seperate coax feed is ok.
I can't install a seperate Yagi above the KLM because of the windload.
A Yagi below with a ringrotor is also not possible because of an 80m 4-Square
which is around the tower.
I know how to calculate and build the 2 element, but I don't know how this will
influence the tribander. Has anyone ever done this with NEC ?
Any info about this is very welcome.
TOM DL2OBO/DF0EE
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|