Towertalk
[Top] [All Lists]

RE: [TowerTalk] grade 5 bolts

To: "Towertalk" <towertalk@contesting.com>
Subject: RE: [TowerTalk] grade 5 bolts
From: "Keith Dutson" <kjdutson@earthlink.net>
Reply-to: keith@dutson.net
Date: Mon, 16 Aug 2004 22:40:32 -0500
List-post: <mailto:towertalk@contesting.com>
Thanks for the tip.  Also, I have found that the SS hardware sold for
sailboat owners seems superior to that made for other markets.  But, it is
quite expensive.

Keith NM5G

-----Original Message-----
From: Tim Duffy K3LR [mailto:k3lr@k3lr.com] 
Sent: Monday, August 16, 2004 9:43 PM
To: keith@dutson.net
Cc: TowerTalk
Subject: Re: [TowerTalk] grade 5 bolts

I have had great success using "never seize" on the threads of stainless
U-bolts at K3LR.
I am able to tighten them without problem.
There are also several different  types/strengths of stainless material.
Most large fastener houses have the specifications which they will share
with their customers. A Google search may bring the information as well.

73!
Tim K3LR



Keith Dutson wrote:

> Stainless is best for things like shackles, nuts, washers and lockwashers.
> Hot dipped galvanized hardware lasts a very long time.  Electroplated 
> hardware (zinc) must be painted to avoid rust.  Avoid stainless steel 
> bolt/nut combinations that will need to be torqued tight.  There is a 
> tendency for the threads to gall, and once galled, the nuts are 
> virtually impossible to remove.  A good example to avoid is all-stainless
u-bolts.
>
> Keith NM5G
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com 
> [mailto:towertalk-bounces@contesting.com] On Behalf Of K4FJ@aol.com
> Sent: Monday, August 16, 2004 4:22 PM
> To: Cqtestk4xs@aol.com; towertalk@contesting.com
> Subject: Re: [TowerTalk] grade 5 bolts
>
>
> In a message dated 8/16/2004 5:00:56 PM Eastern Standard Time, 
> Cqtestk4xs@aol.com writes:
>
> The Home  Depots and Lowes in the Tampa area do NOT carry grade 5  
> either in
>
> Galvanized or Stainless.  If you live in a fairly large city,   check the
> big
> specialty houses that carry just fasteners, screws, bolts  and  such.  
> The only problem you may face is a minimum order,  generally around  $50.
>
> Bill  K4XS
> _______________________________________________
>
> Bill's advise is best, but I am fairly sure I did but grade 5 bolts at 
> either Home Depot or Lowes in Fredericksburg, VA or Alexandria, VA.
>
> So, maybe it varies with Home Depot and Lowes, and maybe not.  Look  
> for the three tick marks on the bolt head.  Whatever I bought was  
> galvanized, and not stainless.  I find the latter undesirable for the  
> price, because it is too easy to paint galvanized hardware for long 
> term  protection and it is stronger.
>
> 73, Steve
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless Weather Stations", and lot's more.  Call Toll Free, 
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>