Towertalk
[Top] [All Lists]

RE: [TowerTalk] ground strap width: 3' vs 6'...

To: <mike@ka5cvh.com>
Subject: RE: [TowerTalk] ground strap width: 3' vs 6'...
From: "David Giuliani" <David@Giuliani.org>
Date: Wed, 18 Aug 2004 06:42:31 -0700
List-post: <mailto:towertalk@contesting.com>
Thanks for the response. I should have said "flashing" instead of "strap".

Strap is a more efficient geometry than tubing bcause it supplies a lower
impedance from its larger surface area; tubing > solid because it puts the
copper close to the skin where it does the most good. Strap will slide under
the shingles along the side of the house, so that's a good thing.

David

-----Original Message-----
From: Michael A. Urich [mailto:mike@ka5cvh.com]
Sent: Wednesday, August 18, 2004 3:54 AM
To: David Giuliani
Cc: Tower Talk
Subject: Re: [TowerTalk] ground strap width: 3' vs 6'...



> I am installing ground straps between a garage roof mounted tower

> Copper strap will be
> used in two places, each side of the garage, to run between the tower base
> and the grounding system, about 50' each run.

> David, WA6PXX, Mercer Island, WA



Mike wrote

I may be showing ignorance here or do not fully understand what you are
trying to accomplish but wouldn't copper tubing <say 1/4" - 3/8">
accomplish the same thing?

Mike Urich, KA5CVH
http://ka5cvh.com

Character = How you treat people who can do nothing for you in return!


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>