Towertalk
[Top] [All Lists]

RE: [TowerTalk] How to best determine the need for a balun

To: "'reflector -tower'" <towertalk@contesting.com>
Subject: RE: [TowerTalk] How to best determine the need for a balun
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Date: Sat, 16 Oct 2004 15:57:56 -0000
List-post: <mailto:towertalk@contesting.com>
> Another thing that is interesting is pretty much everyone
> proposing small elevated counterpoise systems has included a
> warning buried in the text that the feedline needs
> decoupled, but everyone ignores it. When I was measuring
> elevated radial systems I found adding a choke or current
> balun increased the FS of the elevated system by as much as
> 1dB or more, and I wasn't looking for a worse case
> condition.

What kind of geometry was this with??  What about a case where the
feedlines of a 4-square with elevated feed points is in the same plane
as the radials??  Would the outside of the shield be any different than
any other radial in this case?

> If the idea of using a current balun is troublesome, get a
> magic marker out and write the word "isolation choke" where
> it used to say "balun". Then it won't confuse the RF. ;-)

good idea, I have always hated the idea of calling a glob of ferrites or
a coil of coax a 'balun'.

David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>