Re: [TowerTalk] common grounds

[jeff millar <wa1hco@adelphia.net>]

Definitely bond everything together. You don't describe the placement of 
tower, switches, feedlines, and grounding But in general it's best to 
make everythink as close together as possible for lighting currents. But 
without more description, it's hard to say.

jeff, wa1hco

Craig Clark wrote:

> Will I inherit problems if i use a common ground wire for an antenna 
> switch and two antenna stack switches? Doing so would "save" me two 
> ground wires.
>
> I should "know" the answer but don't.
>
>
> 73, Craig Clark, K1QX
>
> RADIOWARE AND RADIO BOOKSTORE
> PO BOX 209
> RINDGE NH 03461
> 603 899 6957
> WWW.RADIO-WARE.COM
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk