[TowerTalk] I.C.E. Products waterproofing

["Alan C. Zack" <k7acz@cox.net>]

I have just received my recent order of I.C.E. coax Suppressors 
including the Model 349 Rotor control wire protector.
I will be installing these at the base of my tower using the ICE 318-4 
mounting fixture.  My tower is grounded using a linked three point 
(120 degree) 10 ft ground rod UFER ground system.

Since the suppressors will be exposed to the elements I wonder if some 
of you may share the methods you may use to waterproof the coax and 
rotor cable screw connections.  My plan is to coat the connections 
with a product called liquid tape then cover them with the commercial 
grade of coax-seal.  Would anyone have experience on how this method 
holds up to ultraviolet exposure that is part of living in the 
cloudless skies of the Las Vegas valley?

TIA & 73
__________________________________________________________________________ 


Alan Zack
Amateur Radio Station K7ACZ
Las Vegas, Nevada, USA
Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer, U.S. Coast Guard, Retired
U.S. Coast Guard, Always Ready, Always There
Every hour, Every day, Around the Clock and Around the World
SEMPER PARATUS
http://www.gocoastguard.com
http://www.uscg.mil/d14/units/asbp/uscgasbp/
DEPARTMENT OF HOMELAND SECURITY


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk