[TowerTalk] Wilson Crankup Info Needed

[George Liepins <geliepins@nc.rr.com>]

The cable on my TT-45  Wilson Crank-up tower rusted through and broke 
inside the 4" outer tube.  Installation instructions don't cover details 
like how is the cable attached to the bottom of the inner 3.5" section.

To replace the cable, due to real estate constrictions, I have to use a 
crane to lift out the inner tube to remove the remaining cable, attach 
the new cable and reinsert the tube back inside the tower.  In order to 
make preparations before the crane gets here, I need to know in what 
fashion is the cable attached to the bottom of the inner tube, and 
possibly some other important details before I have the tube pulled out.

I sure would be grateful if someone in the know could provide this info.

73, George, KE4HW

My email is geliepins@nc.rr.com, or via the list is fine.

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk