A week ago I finished installing my new custom torque arm guy bracket on the
tower. I use 1/4" EHS wire rope for all guys. Recommended guy tension for a
standard single guy wire is 600 pounds [10% of breaking strength]. When using a
TA45 with two guys going down to each anchor, should each guy be adjusted to
the same tension as used for a single guy wire, or something else?
Thanks and HNY,
Jim Idelson K1IR
email k1ir at designet.com
web http://www.designet.com/k1ir
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|