> Get a bunch of cheap knockoff locking pliars for 3 to 5 bucks each (about
> what a thimble and 3 clips would cost but don't get visegrips or you will
go
> broke) and pull the rope tight through the earth screw eye and clamp it
with
> the locking pliars. get the needlenose pliars as they can handle two
ropes
> each. These hold the rope fine and are a walk in the sun compared to
> kneeling in the snow for a half hour with nut drivers, pliars, etc.
> tightening clips.
Do you clamp the rope around the eye, or at some distance? I'm having a
tough time visualizing exactly what you're clamping here. Off hand, I love
the idea of using inexpensive clamping pliers.. You could use the slack end
of the rope to tie around the pliers to make sure they don't unclamp.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|