Towertalk
[Top] [All Lists]

[TowerTalk] Radials Questions - 270 or 360 degrees.

To: Towertalk@contesting.com
Subject: [TowerTalk] Radials Questions - 270 or 360 degrees.
From: Bill Coleman <aa4lr@arrl.net>
Date: Tue, 4 Jan 2005 22:30:09 -0500
List-post: <mailto:towertalk@contesting.com>

I am shunt feeding my 15m high tower on 80m. I recently added more 60 foot ground-mouted radials to go from 13 to 24 total radials. Because the tower is situated at the corner of my house, the radial field only completes 270 degrees of the circle.


I've been impressed with the improvement in this antenna by doubling the radials. The lack of radials in 90 degrees of the circle has me wondering if there isn't a way I could improve this further.

Question 1: How does the missing 90 degrees of radials affect the pattern of the antenna? The missing segment goes from roughly NW to NE -- some important directions from this location.

In thinking about the problem of running radials in this segment, it occurs to me that I do have some limited room to sneak a ground wire into the basement and run some radials there. This boils down to two options:

A) have a 3 foot wire from the tower base enter the basement at the floor, then fan out to 3-6 radials varying from 15 to 45 feet. These would be either 14 gauge copper wire, or more likely copper foil tape (which would stick to the floor and I can walk over it without tripping).

B) have a 3 foot wire from the tower base enter the basement at the floor, then rise 9 feet vertically to the ceiling, then fan out to 3-6 radials varying from 15 to 45 feet, run across the ceiling.

Question 2: In looking at option B, is the vertical segment going to have an adverse effect on the pattern in the NW to NE direction? Is the vertical segment going to change the phase of the currents and ultimately destroy any gains by adding the radials?

Question 3: Is there any coupling or danger associated with having these radials inside the house? Is there a potential for high voltages to appear, or to have the elements radiating RF inside the structure? Is this different from option A or B?

Question 4: Of the three options (A, B or do nothing) which offers the best possibility of improving the antenna efficiency or evening out the radiated pattern of the vertical? What would you recommend and why?


I'd appreciate any suggestions.



Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net Quote: "Not within a thousand years will man ever fly!" -- Wilbur Wright, 1901

_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>